https://youtu.be/AOG9xE62jYU

current flow:

10.10.23 Progress

• Fixed the Drone Mode by adding a third mixer

• Added tap BPM

  • in addition to the arp speed knob

• Found out the ADSR is being weird because of the pots

  • need to rewire new pots

• Random Arp Order

  • random function to chose a random index
    • next time do it with replacements where it loops the arp

• Delay

  • if it glitches out increase audio memory

  Memory for the delayed signal is take from the memory pool allocated by AudioMemory(). Each block allows about 2.9 milliseconds of delay, so AudioMemory should be increased to allow for the longest delay tap.

  Each board has a maximum possible delay.

  debug multiplexer pots

  put multimeter on middle pin of pot and see if it fluctuates between 0-3 volts when you turn it

  it should not be jumping around

  • ok so the pots are fine I think its the multiplexer
  • next step: try putting the mUX on a different board and test one pot at a time
    • try a low capacitor in the circuit coming out of the output of the mux

NEXT STEPS :

Take out the multiplexer???

no pots on 18,19,20,21,23

NEW ADSR VIBE

• another envelope — this one controlling filter
  • can use the same ADSR to control it?
  • take out the sustain release
  • switch with AD on filter and the volume

RECORD GESTURES