GUItool copy and paste

hi, we are so back …

12/17/24

adding audio input —

• Using the midi thru jack as the audio input instead of the quarter inch like i had initially planned. that way one day i can change the mono signal of the oscillators to stereo.

  • for ex — in the detune spread i can send the other oscillators out

    IMG_5611.MOV

    IMG_5612.MOV

    IMG_5613.MOV

• all i gotta do now is directly wire the line from the midi thru into the audio

cutting the ground and line from the midi circuit

run a new ground and signal into the teensy audio shield — by running the right and left signal pins from the jack to the R and L line in on the shield and the ground pin of the jack to the ground pin of the shield

HOW I WANT IT TO WORK:

• When you plug the audio input in — it will automatically process everything through the current flow
• If not audio is plugged in then business as usual :3

NOW time for the CODE :

Teensy4.1_Serenity_Audio_Input_12.18.24 | Arduino 1.8.19

LOOK AT THE GUI NOW :)